Drill Tool (Required)
This motor requires a L1 Certification to buy.
The AeroTech Disposable Motor System DMS is a single-use motor in kit form that is assembled by the user. All of the Aerotech DMS motors use all-disposable components. The nozzle and propellant are already installed. You will need to set the desired delay time using the Universal Delay Drilling Tool (UDDT), Not Included, and then pour in the ejection charge. The Universal Delay Drilling Tool (UDDT) is required to adjust to a shorter time delay on all DMS rocket motors.
DMS motors feature a filament-wound fiberglass casing, a glass-reinforced composite phenolic nozzle, a molded plastic bulkhead and RCSs exclusive Super White Lightning™ aerospace grade composite propellant formulation, which produces a brilliant white flame with lots of dense white smoke and a throaty roar at lift-off. Super White Lightning™ has a higher specific impulse, a higher density and a higher burn rate than White Lightning™ propellant.
This AeroTech motor pack comes with 1 rocket motor and 1 FirstFire™ Initiator and requires HAZMAT shipping via FEDEX.
Certified by the Tripoli Rocketry Association (TRA), the National Association of Rocketry (NAR) and the Canadian Association of Rocketry (CAR).
Specifications:
Motor Diameter: 1.125 inches (29mm)
Casing Length: 8.00 inches (203mm)
Total Impulse: 236 N-sec
Average Thrust: 169 newtons
Peak Thrust: 249 N-sec
Thrust Duration: 1.3 seconds
Delay Time: adjustable up to 13 seconds
Propellant Weight: 112 grams
Motor Weight: 202 grams
Earn Reward Points: 46
Earn Discount: $1.38