Low Boom SST

INSTRUCTIONS Estes has created a 30-inch long, delta-winged model rocket of the next generation of quiet, super-fast passenger jets The Expert level kit includes balsa-constructed, underwing engine pods and detailed water-slide decals Launch the Low-Boom SST on a C6-3 engine. Watch it climb to 400 feet before gently returning under a large 15-inch parachute The Low-Boom SST model rocket is a glimpse into a potential SST revolution The SST revolution might be on its way after all…

Q-Jet D20-4 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet D20-6 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet D20-8 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Vapor

INSTRUCTIONS Looking for an adrenaline rush? The Vapor Estes rocket is the perfect choice for advanced builders and thrill-seekers alike. With D and E engines, this sleek model rocket disappears into the sky like a puff of smoke, reaching altitudes of up to 900 ft. The massive motors are sure to send shivers through your body as you feel them rumble through your chest. The Vapor Estes rocket comes in two different looks and requires 2-3 hours of careful crafting to assemble. You'll need a …

Mini Alpha Launch Set

   Introducing the Estes Mini Alpha! Designed with the beginner in mind, this model rocket offers an exciting introduction to the world of model rocketry! The Mini Alpha uses mini engines (13MM) that provide a powerful yet manageable thrust, allowing users to launch their rockets with ease. With the recommended A10-3T engine, the Mini Alpha soars to impressive heights, reaching an altitude of 690 feet! Equipped with a streamer recovery system, the Mini Alpha ensures a safe and con…

Aerotech Aerotech 24/60 Case

For use with all AeroTech RMS-24/60 motor reload kits. This reusable AeroTech RMS-24/60 aluminum motor case requires a forward closure and aft closure. Motor reloads and closures sold separately. Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Aerotech Aerotech 24/60 Forward Closure

For use with all AeroTech RMS-24/60 motor reload kits. This reusable AeroTech RMS-24/60 aluminum motor forward closure requires an aluminum motor case and aft closure. Motor reloads and other aluminum hardware sold separately. Important: Mid Power RMS reload kits are not compatible with High Power RMS products

Bright Hawk

The Bright Hawk model rocket is Big, Simple & Sturdy! The Bright Hawk is the one of the largest Level 1 model rockets in the Quest fleet. The plastic one-piece fin-unit and self-adhesive decals make this large model rocket ready to fly in a very short time. You can enjoy many flights with this sturdy model rocket. This kit does not require painting and colors of the nose cone and fin-unit may be different than shown in the image. Quest Skill Level 1 beginner modeler kits may require a little …

Payloader One

The Quest Payloader One model rocket kit is one of three Quest model rockets to use TTW Through-The-Wall balsa fin attachment. There are three precise pre-cut slots in the body tube that allow for perfect placement and location of the fins. Also features a semi-transparent payload compartment and parachute recovery system. The Payloader ONE model rocket mixes challenge and high performance. Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting.…

Astra III

Bright, bold and rugged, the Astra III is one of our bestselling rockets. Part of our Quick-Kit family, it features a unique plastic fin-can assembly. It is a great kit for groups who have already built one of our Skill Level 1 rockets with a one-piece molded fin-unit like the Viper. It requires a little more skill to assemble, as individual fins are fitted and glued into the center fin-can unit, but still goes together very easy and fast. The Astra III rocket features a Kevlar/elastic shock cor…

Seeker

The Seeker model rocket is quick off the pad and even quicker to build. The Seeker model rocket is a great choice when building time is limited. With pre-finished colored body tubes and a full self-adhesive decal set the Seeker model rocket goes from 'kit to pad' faster than you can say “wow!” Includes a large payload section too. Quest Skill Level 1 Quick-Kits do not require painting or finishing beyond the application of self-adhesive decals and can usually be completed in 30 to 45 minu…

Quick-Q

Great Sounding Rocket style graphics! Features our Quick Kit easy assembly method and terrific performance! Quest Skill Level 1 Quick-Kits do not require painting or finishing beyond the application of self-adhesive decals and can usually be completed in 30 to 45 minutes or less.

Sport

A good looking...well...SPORT rocket. Bright yellow with black decals, easy to see in the air, even easier to see in the high grass. Easy-to-build with no painting needed. Includes self-adhesive decals, plastic fin unit, and streamer recovery! Includes both 18mm and 24mm motor mounts. Quest Skill Level 1 Quick-Kits do not require painting or finishing beyond the application of self-adhesive decals and can usually be completed in 30 to 45 minutes or less.

Gamma Ray Payloader

Featuring a translucent payload cargo section, the Quest Gamma Ray is a sleek payload capable vehicle at a great price. Quest Level 2 experienced modeler kits require some basic beginner skills in model rocketry construction and finishing. Assembly, finishing and glue drying time can take a day or more.

Aerotech Aerotech 24/40 Case

For use with all AeroTech RMS-24/40 motor reload kits. This reusable AeroTech RMS-24/40 aluminum motor case requires a forward closure and aft closure. Motor reloads and closures sold separately. Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Aerotech Aerotech 24/60 Aft Closure

For use with all AeroTech RMS-24/40 motor reload kits. This reusable AeroTech RMS-24/60 aluminum motor aft closure requires an aluminum motor case and forward closure. Motor reloads and other aluminum hardware sold separately. Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Aerotech 29/40-120 Forward Closure

For use with all AeroTech RMS-29/40-120 motor reload kits. This reusable AeroTech RMS-29/40-120 aluminum motor forward closure requires an aluminum motor case and aft closure. Motor reloads and other aluminum hardware sold separately.  Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Star Orbiter

INSTRUCTIONS Is your dream to reach new heights in no time? The 45-inch Star Orbiter Rocket is what you need! With a quick-release motor retention system and the option to purchase the 9750 Pro Series II 29MM Retainer Set separately, this kit is perfect for anyone looking to take their rocket-building skills to the next level. Don't let the size of the Star Orbiter Rocket intimidate you – construction is a breeze and you'll be ready to launch in just a few days. Get ready to experience t…

Space Corps Corvette Class

INSTRUCTIONS Looking for a powerful and sleek rocket for your collection? Look no further than the Space Corps Corvette Class military craft from Estes. This small but mighty vessel is designed for reconnaissance and defense, able to travel at near light speed to intercept potential threats and collect valuable intelligence. Equipped with a powerful C6-5 engine, this rocket can soar up to 650 feet in the air, making it a spectacle to behold both on and off the flying field. With its sleek …

Leo Space Train

INSTRUCTIONS The Estes LEO Space Train kit allows you to bring to life the impressive features of this spacecraft. The kit includes precision-cut balsa fin and wing panels with laser-etched details, and an authentic-looking plastic engine nozzle and custom LEO Space Train "lion" graphic and logo. It can reach up to 300 feet (91 meters) on a single-stage C6-3 engine and return gently to Earth under its own 18-inch parachute. To build this rocket, you will need scissors, pencil, ruler, fine …

E12-8 (3ea)

The Estes E12-8 engine is a 24mm diameter upper stage engine designed for model rocket flight. This engine can also be used as a single stage engine. Maximum lift weight is 12 ounces. Each package includes 3 engines, 4 starters and 4 starter plugs. These engines require hazmat shipping via Fedex.

E12-6 (3ea)

The Estes E12-6 engine is a 24mm diameter upper stage engine designed for model rocket flight. This engine can also be used as a single stage engine. Maximum lift weight is 14 ounces. Each package includes 3 engines, 4 starters and 4 starter plugs. These engines require hazmat shipping via Fedex.

E12-0 (3ea)

The Estes E12-0 engine is a booster stage engine designed for model rocket flight and has to be used with another 24 mm engine. This engine is for flights in rockets weighing less than 16 ounces, including the engines. Each package includes 3 engines, 4 igniters and 4 igniter plugs. These engines require hazmat shipping via Fedex.

E12-4 (3ea)

The Estes E12-4 engine is 24mm diameter an upper stage engine designed for model rocket flight. This engine can also be used as a single stage engine. Maximum lift weight is 17 ounces. Each package includes 3 engines, 4 starters and 4 starter plugs. These engines require hazmat shipping via Fedex.

Aerotech 29/40-120 Aft Closure

For use with all AeroTech RMS-29/40-120 motor reload kits. This reusable AeroTech RMS-29/40-120 aluminum motor aft closure requires an aluminum motor case and forward closure. Motor reloads and other aluminum hardware sold separately. Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Q-Jet C18-4 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Black Brant II

INSTRUCTIONS Get ready for an exciting launch with the Estes Black Brant II rocket! This 1:13 scale replica of one of the earliest rockets in the Black Brant family features laser-cut wood fins and plastic toothpicks, giving it a classic yet modern look. Standing nearly 25 inches tall, this rocket is one of the highest flying model rockets in the Estes scale collection, with recommended D12-7 engines (sold separately) allowing it to reach heights of up to 1300 feet. Loaded with scale detai…

Q-Jet C12-4 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet C12-6 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet C12-8 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

3 Bandits

INSTRUCTIONS Get ready for a thrilling heist like no other with these 3 bandits model rockets that are attacking the clouds! Equipped with mini engines, these bandits are sneaky, fast, and won't let gravity hold them back. Moreover, these rockets are perfect for beginners, easy to assemble, and will have you flying in no time. Here are some features of these 3 bandits: Set of three rockets for added fun and excitement Mini engine powered for fast and efficient launches Can reach …

Comanche 3

INSTRUCTIONS Take your rocket launching experience to new heights with the Comanche-3 Model Rocket. This impressive piece of engineering is designed to soar through the skies and reach great heights, thanks to its powerful booster engines that provide the necessary thrust. The rocket is also equipped with a dual streamer recovery system that ensures safe recovery and readiness for future use. With easy and straightforward assembly, you can have the rocket ready for lift-off in no time. The…

54mm Forward Closure Bulkhead Plug

For use with AeroTech RMS-54 high power motor reload kits. Delrin bulkhead plug used for endburn motor J99N-P  54/852 reload (10099P). Motor reloads sold separately. Important: High Power RMS reload kits are not compatible with Mid Power RMS products.

Q-Jet C18-6 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet C18-8 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

E16-4 (2ea)

The Estes E16-4 engine is 29mm diameter an upper stage engine designed for model rocket flight. This engine can also be used as a single stage engine. Maximum lift weight is 20 ounces. Each package includes 2 engines, 2 starters and 4 starter plugs. These engines require hazmat shipping via Fedex.

E16-0 (2ea)

Each package includes 2 engines, 2 starters and 4 starter plugs. These engines require hazmat shipping via Fedex.

E16-8 (2ea)

The Estes E16-8 engine is a 29mm diameter upper stage engine designed for model rocket flight. This engine can also be used as a single stage engine. Maximum lift weight is 14 ounces. Each package includes 2 engines, 2 starters and 4 starter plugs. These engines require hazmat shipping via Fedex.

E16-6 (2ea)

The Estes E16-6 engine is a 29mm diameter upper stage engine designed for model rocket flight. This engine can also be used as a single stage engine. Maximum lift weight is 16 ounces. Each package includes 2 engines, 2 starters and 4 starter plugs. These engines require hazmat shipping via Fedex.

Aerotech Aerotech 24/40 Forward Closure

For use with all AeroTech RMS-24/40 motor reload kits. This reusable AeroTech RMS-24/40 aluminum motor forward closure requires an aluminum motor case and aft closure. Motor reloads and other aluminum hardware sold separately. Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Porta Pad II Launch Pad

Quick Assembly. Requires no glue or tools. Not Included – 2220 Electron Beam Launch Controller Comes complete with blast deflector, standoff stem, two-piece 1/8 in. launch rod and launch rod cap. Launch direction may be adjusted 30 degrees from vertical and can accommodate a 3/16 in (5 mm) Maxi Launch Rod - sold separately. Minor assembly required and no glue or tools are needed. Can be used to launch rockets powered with all mini, standard (A-C) and D engines.

Tazz

INSTRUCTIONS Looking for a classic Estes rocket kit with a modern twist? Look no further than the Tazz Estes rocket! This kit has been re-imagined with a specially designed engine mount featuring two molded tabs that keep the wing elevators in the flat position during boost for smooth flights, and then move them into the full "up" position at apogee for thrilling spins on the way down. With balsa wings and alignment tabs that fit into pre-cut slots, aligning the wings is a breeze during as…

Viper

The Viper model rocket combines the simplicity of a single piece fin-unit with the added complexity of parachute recovery. The Viper model rocket provides the perfect combination of a challenge and precision flight. One-piece plastic fin-unit simply slides into position on the body tube. Color coded parts make group building sessions much easier for an adult leader. One of our all-time group favorites! This kit does not require painting and colors of the nose cone and fin-unit may be different t…

Aerotech Aerotech 24/40 Aft Closure

For use with all AeroTech RMS-24/40 motor reload kits. This reusable AeroTech RMS-24/40 aluminum motor aft closure requires an aluminum motor case and forward closure. Motor reloads and other aluminum hardware sold separately. Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Hi-Flier XL

INSTRUCTIONS To begin with, the Estes Hi-Flier XL rocket is the perfect choice for those looking for a sleek and high-flying rocket experience. Here are some of the features and benefits of this popular rocket: Upsized replica. The Hi-Flier XL is an upsized replica of the #1 selling 2178 Hi-Flier rocket, standing over 30 inches tall. Moreover, with its sleek design, it is sure to impress. High-performance rocket. The Hi-Flier XL can reach heights over 1300 feet, making it …

Green Eggs Lofting Rocket

INSTRUCTIONS Designed for Estes C11 and D engines, this rocket model can safely carry a regular-sized raw egg as its payload. With its clear payload section, you can even fit two eggs with a D12-3 engine! The Green Eggs rocket's swept fins not only add stability during flight but also allow the Green Eggs rocket to stand by itself. Additionally, the balsa fins are thick enough to enhance alignment and provide exceptional strength, making it suitable even for mounting through a wall. With a…

Nike-X

  INSTRUCTIONS Experience the thrill of rocketry with the Nike-X single stage rocket, a scale-liked model of the army's 4th generation, two-stage surface-to-air interceptor missile. The Nike project spanned multiple rockets and design iterations, but the Nike-X Single Stage Rocket remains a fabulous creation. Featuring a Nike-style design and army décor with quality real roll pattern waterslide decals, this rocket will bring your collection to life. It boasts great performance, impres…

Fin Alignment Guide

FAST & ACCURATE fin alignment Great for three or four finned rockets Fits body tubes ranging from BT-20 to BT-80 A precision molded accessory that makes it easy to glue three or four fins to various sized body tubes ranging from BT-20 to BT-80 diameters. Unique and adjustable vertical fin holders can accommodate either 3/32 in. or 1/8 in. balsa, bass or plywood fins. This is a must-have tool for any serious model rocket builder. Never attach your fins wrong again and remove that pa…

AltiTrak Altitude Tracker

How high did it really go? Next time, measure it with this easy to use device. Pull the trigger, follow the rocket in the sights to apogee, then release the trigger to lock the reading. It is that easy. No need for hundreds of dollars of altimeters! The Estes Altitrack was designed for educational uses, but is perfect for any application of rapid design. Track the altitude of your rocket without reducing the height by adding mass. Two AltiTraks can give you much greater accuracy. Perfect f…

Alpha III

INSTRUCTIONS Start your model rocketry journey with a true classic. The Alpha III was the first rocket in the beginner series. With pre-colored parts and self-stick decals, the Alpha III will be ready for liftoff in an hour. Whether you’re a first timer or a long time flyer, the Alpha III beginner rocket is a must have in every rocketeer's collection! Recommended Engines: 1/2A6-2, A8-3, A8-5, B4-4, B6-4, B6-6, C6-5, C6-7 Projected Max Altitude: 1150 ft. (351 m) Simple assembly M…

Q-Jet B14-5 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet B14-3 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet B14-7 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Totally Tubular

Everyone should have at least one tube-fin rocket in their collection. A great flier, the Totally Tubular model is durable and will take all the hard landings you can dish out. Unique design utilizes tube-fin stabilization. Very easy to build. All the tubes are already colored, and the decals are self-adhesive for easy application. No painting required! Fun to fly with streamer recovery. Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. As…

Quest America

Show your patriotism and fly the America. Balsa fins and a molded plastic cone make this a good Skill Level One build with parachute recovery. Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.

Cobalt

Short, Fat, and Fun (description approved by Quest!) The short length of this rocket makes it only flyable on A size engines. If you fly it with a B or C, then you will need to add nose weight (not included). Features balsa fins and streamer recovery. Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.

Astra

The flagship of the Quest model rocket line! The Quest Astra is one of the most widely used model rocket kits offered and features Quest's TTW "Through-The-Wall" balsa fin design. TTW fin attachment makes building so much easier. It really helps you glue the rocket fins on straight and in the correct position. The Astra includes color coded parts to make identification for assembly easier. It uses a Kevlar shock cord that is anchored right to the engine mount for reliable recovery. These feature…

Bull Pup 12D

INSTRUCTIONS Get ready for an adrenaline-filled adventure with the Estes Bull Pup 12D model rocket. This highly detailed version of the USAF AGM-12D Bull Pup air to ground missile is perfect for sport scale enthusiasts who want to take their hobby to the next level. Developed in the 1950s, the Bull Pup 12D remained in combat use until the 1970s, with over 30,000 built and used until it was decommissioned in the mid-80s.This rocket stands 15.6 inches tall and can reach up to 675 feet on Est…

Q-Jet B4-4 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet B4-6 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

75mm Forward Case Spacer

For use with all AeroTech RMS-75 high power motor reload kits. Motor reloads sold separately. Important: High Power RMS reload kits are not compatible with Mid Power RMS products.

Q-Jet B6-6 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet B6-4 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Der Red Max

INSTRUCTIONS The Der Red Max rocket model is a classic, fun addition to any rocket enthusiast's collection. With a large stable design, this rocket performs great and reaches heights of over 500 feet with standard engines. Featuring laser cut wood fins for improved performance and a waterslide decal set, including the iconic skull and crossbones, this rocket is a must-have. You'll need some basic tools and finishing supplies to build it, but the result is a 16-inch tall rocket that looks a…

Destination Mars MAV

INSTRUCTIONS Talking about Destination Mars Rocket: Once again, American engineers and astronauts are being put to the test as they work towards answering the call to land humans on Mars by 2033. Estes answers the call to bring the space race to budding astronauts and enthusiasts worldwide, just like in 1958. Meet the first release in Estes' series Destination Mars, the Mars Ascent Vehicle (MAV)! This lightweight and decorated rocket delights kids and adults while tracking NASA's achieveme…

Solo

INSTRUCTIONS Experience the thrill of flight with Solo Beginner Model Rocket - the easy-to-build rocket with a unique twist! This beginner level rocket features a breakaway pod that glides to the ground, dancing through the sky during recovery, while the main body of the rocket comes down under parachute to touch down safely. Standing over 2 ft. tall and utilizing a 15 in. parachute, the Solo can fly up to 500 ft. before breaking apart and returning to the ground. To build the Solo, you'll…

Terra GLM

INSTRUCTIONS The designers hypothetically created the Terra GLM rocket around the latest rocketry and armament technology for ground launch. Some highlights of this dummy missile are its next-generation ramjet engine, which includes a variable intake scoop for hypersonic flight. Additionally, it utilizes lightweight and efficient fuel cell technology to power all electronic and electrical parts. Moreover, it also includes a split fin design with an upper stabilizing section and lower fl…

Illusion

INSTRUCTIONS Get ready to experience the thrill of the Estes Illusion rocket! Designed to fly on a range of Estes A through C engines, the Illusion isn’t just built to fly fast, it looks fast too! As a Beginner-Level rocket kit, the Estes Illusion is perfect for those who want to get into model rocketry without spending hours on complicated assembly. You don't need to paint or sand this rocket kit - all molded plastic components come pre-colored in a vivid red, black, and grey color sche…

Ghost Chaser

INSTRUCTIONS The hauntingly beautiful Ghost Chaser Rocket Kit is a deceptively simple flyer packed with fantastic features. Designed as a beginner model, this rocket goes together quickly in the hands of even the newest rocketeer. In no time you’ll have this finished bullet standing nearly two feet tall with its silvery white body tube and blue translucent fins that almost seem to glow. Looking great almost straight from the box, this Ghost Chaser Rocket Kit, features a clever system of …

18/20 Case

For use with all AeroTech RMS-18/20 motor reload kits. This reusable AeroTech RMS-18/20 aluminum motor case requires a forward closure and aft closure. Motor reloads and closures sold separately.  Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Aerotech 54mm Forward Seal Disc

For use with AeroTech RMS-54 high power motor reload kits. Motor reloads sold separately. Important: High Power RMS reload kits are not compatible with Mid Power RMS products.

Alpha

INSTRUCTIONS If you're looking for a high-quality starter rocket that won't disappoint, get an Alpha and start flying today! With millions sold over three decades, this rocket is the perfect introduction to the world of rocketry. With its easy assembly and reliable performance, the Alpha is sure to hook any student who gives it a try. Not only is Alpha easy to build and fly, it also looks great with its suggested color scheme and red, white, and blue decals. And with the ability to reach c…

U.S. Army Patriot M-104

Need a classic rocket model to add to your collection? Estes U.S. Army Patriot M-104 rocket is the best solution! Based on the U.S. Army’s M-104 surface-air missile, this 1:10 scale rocket dominated the skies in the past and can blast 600 feet high using Estes standard model rocket engines. INSTRUCTIONS Perfect for first-time scale model builders, the U.S. Army Patriot M-104 Rocket features a top-notch two-piece body tube and genuine-looking self-stick decals. Easy to build and finish in j…

18/20 Forward Closure

For use with all AeroTech RMS-18/20 motor reload kits. This reusable AeroTech RMS-18/20 aluminum motor forward closure requires an aluminum motor case and aft closure. Motor reloads and other aluminum hardware sold separately.  Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Q-Jet A3-4 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Q-Jet A3-6 (2-pack)

All Q-Jet™ 2-Motor Launch Packs come complete with FirstFire™ Micro Initiators and bright orange Parachute Recovery Wadding. All Q-Jet™ motors are U.S. mailable with no hazmat fee!

Clear Payload Assortment (9pc)

Clear payload sections.

30" Estes Nylon Parachute

Strong and durable to safely recover larger-sized rockets Bright red for great visibility Comes preassembled A fully assembled 30 in. (76 cm) nylon parachute intended for larger model rockets where strength of the recovery system is paramount. Made of high-quality red nylon cloth, this chute also features stitched braided nylon shrouds for reliable rocket recovery.

18/20 Aft Closure

For use with all AeroTech RMS-18/20 motor reload kits. This reusable AeroTech RMS-18/20 aluminum motor aft closure requires an aluminum motor case and forward closure. Motor reloads and other aluminum hardware sold separately.  Important: Mid Power RMS reload kits are not compatible with High Power RMS products.

Starhawk

When Team Quest hits the road to work with kids, the Starhawk model rocket is the rocket of choice for tight budgets and smaller flying fields. The Starhawk's streamlined construction, single piece fin-unit, and streamer recovery ensure that it can be built and ready for launch in a single 45 minute session! This kit does not require painting and colors of the nose cone and fin-unit may be different than shown in the image. Quest Skill Level 1 beginner modeler kits may require a little measur…

Aerotech 38/480-1320 Forward Seal Disc

For use with all AeroTech RMS-38/480, RMS-38/600, RMS-38/720, RMS-38/1080 and RMS-38/1320 high power motor reload kits. Motor reloads sold separately. Important: High Power RMS reload kits are not compatible with Mid Power RMS products.

Dragonite

INSTRUCTIONS Looking for a quick and easy way to experience the excitement of model rocketry? Dragonite rocket kit from Estes is the perfect choice! Designed for young and new rocketeers, this rocket can be assembled in just minutes using the uniquely molded plastic fin set and pre-colored body tube. And with its high-performance flight profile, this rocket can reach altitudes of up to 925 feet on Estes standard model rocket engines. A colorful 12-inch parachute provides recovery. To build…

Starship Octavius

  INSTRUCTIONS The Starship Octavius is a perfect for beginner rocket enthusiasts. Assembling the kit is a breeze, taking only 15 minutes or less. Once completed, the Starship Octavius rocket will tower over other rockets at 20 inches tall. Complete with a sleek, sci-fi plastic molded nose cone and self-stick decals, the Starship Octavius is sure to turn heads both on and off the flying field. And with an impressive range of engine options, it has the power to reach new heights. Lau…

Sci-Fi Nose Cone Assortment (5pc)

Sci-fi nose cones! Great for your own design or just a replacement for one of ours.

Mongoose

INSTRUCTIONS Experience the excitement of rocketry with the Estes Mongoose, the perfect two-stage rocket for beginners! With its booster engine and standard engine, this rocket can fly to incredible heights of up to 1,800 feet while recovery by parachute or streamer adds to the excitement. In addition to its impressive two-stage capabilities, the Estes Mongoose has another trick up its sleeve: it can also fly as a single-stage rocket. This makes it an excellent choice for both novice and e…

Chiller

The Chiller flying model rocket is a unique and high-performance rocket. This rocket features an aqua chrome nose cone and matching fin, making it stand out from the rest. But don't let its stylish appearance fool you - the Chiller packs a serious punch, reaching altitudes of up to 600 feet with ease. Want to see it soar even higher? Simply add a BT-55 booster and a D12-0 booster engine to reach heights over 1,300 feet!

Power Patrol

Swirled plastic colors are here again! Fun on the launch pad and fun in the sky! Glue the fin can halves together, slip the fins into the fin can slots, tie the shock cord to the nose cone and that fast, you are ready for the flying field! The Power Patrol, powered by standard engines, can reach heights over 1,000 feet!

Micro Maxx Motor Pack (6 piece)

More rocket motors for your Quest Micro Maxx™ rockets! These little powerhouses are designed for backyard flying. Micro Maxx™ rocket motors have big power in a micro size! They are the equivalent of 1/8 A model rocket motor in power and are powerful enough to propel a 4-gram Micro Maxx™ rocket to 50 to 120 feet high! They have a three quarter second burn time followed by a 2 second delay, then ejection. This package includes six Micro Maxx™ model rocket motors and six MMX-Q2 initiato…

Single Water Rocket

Quest Water Rockets are perfect for low-cost rocket flying! Uses air and water as rocket fuel. There's no-cost per launch - You can fly them over and over - and You control the flight performance by varying amount of water and pressure. Flies to over 200 feet! Quest Water Rockets are engineered to amaze students, youth groups, and camps. They are a great STEM learning tool that allows students to explore the “What If I…” process of discovery, exploratory learning and problem solving. Th…

Novia

The Novia model rocket is one of the most traditional of our kits. The Novia features balsa wood fins and streamer recovery. Did you know the Novia has five possible fin configurations? Group building sessions are easy with the included color coded parts. Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.

Planet Probe

Fun-to-fly and easy-to-build. This cone shaped rocket is perfect for small flying areas. Great for 'drag races' or spot landing contests. No Wadding Required with gentle tumble recovery. This kit is great for kids. They can flip the pre-printed aeroshroud over during assembly for a plain white surface they can decorate on their own. Illustrates to consumers that a launch vehicle does not have to look like an arrow to fly like a rocket. Quest Skill Level 1 beginner modeler kits may require a l…

Aerotech 29/240-360 Forward Seal Disc

For use with all AeroTech RMS-29/240 and RMS-29/360 high power motor reload kits. Motor reloads sold separately. Important: High Power RMS reload kits are not compatible with Mid Power RMS products.

54mm Short Forward Case Spacer

For use with AeroTech RMS-54 high power motor reload kits. Motor reloads sold separately. Important: High Power RMS reload kits are not compatible with Mid Power RMS products.

Long Ranger

Introducing the Estes Long Ranger, the ultimate thrill for aspiring rocketeers and seasoned enthusiasts! Crafted with precision, the Long Ranger offers exhilarating launches and awe-inspiring flights that will leave you craving more! Designed for ease of assembly, the Long Ranger ensures that you spend less time building and more time launching! With clear instructions and hassle-free construction, even beginners can get their rockets ready for liftoff in no time. Powered by standard model…

Mini Mean Machine

INSTRUCTIONS To begin with, the Mini Mean Machine is an excellent model rocket kit for hobbyists and rocket enthusiasts alike. Moreover, it offers a scaled-down version of the popular "Mean Machine" rocket, making it a great option for those who want to experience the thrill of high-altitude rocketry without committing to a larger and more expensive model. Here are some more details about the Mini Mean Machine: Easy Assembly: The Mini Mean Machine rocket is straightforward to asse…