Epoxy 30min-4.5oz

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full …

Epoxy 30min-9oz

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full …

Epoxy 5min-4.5oz

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CU…

Rouse-Tech CD4

CD4 Instructions CD4 Specs CD4 Charge Sizing The CD4 unit is designed for deploying parachutes and recovery items in high power and amateur rockets at any altitude. From sea level to space. The CD4 unit can be used in both "low altitude" and "high altitude" configurations. The low level application is for flights under 20,000 ft. where there are no problems with the burning of a pyrogen. For flights over 20,000 feet, the CD4unit can be prepared for high altitude flights by "potting" the…

Epoxy 5min-9oz

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CU…

Epoxy 15min-9 oz

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.

Epoxy 15min-4.5 oz

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.

Aeropack 38mm

For 38mm Minimum Diameter Airframes or 38mm Motor Mount Tubes Precision Machined 6061-T6 Aluminum With Mil-Spec Type II Red Anodizing 5/16-18 Stainless Steel Stud For Fast, Tape-Free & Tool-Free Motor Change Requires Forward Closure With 5/16-18 Threaded Hole Bonds Into Airframe With J-B Weld or High Strength Epoxy Just Slide Motor In And Screw Onto Stud Mount, That`s It! Top of Retainer Has a 10-24 Threaded Hole for Accessory Attachment

Aeropack 38mm Min Retainer With Eyebolt

For 38mm Minimum Diameter Airframes or 38mm Motor Mount Tubes Precision Machined 6061-T6 Aluminum With Mil-Spec Type II Red Anodizing 5/16-18 Stainless Steel Stud For Fast, Tape-Free & Tool-Free Motor Change Requires Forward Closure With 5/16-18 Threaded Hole Bonds Into Airframe With J-B Weld or High Strength Epoxy Just Slide Motor In And Screw Onto Stud Mount, That`s It! Includes 3/16 Welded Stainless Steel Eye-Bolt for Top of Retainer

Aerotech G77-4R/L Redline Rocket Motor (LMS)

The AeroTech Loadable Motor System LMS is a single-use motor in kit form that is assembled by the user. All of the Aerotech LMS motors use all-disposable components. You will need 5-minute epoxy glue to assemble this motor, which is not included. This LMS motor utilizes a patent pending high-strength polymer case and bulkhead, polymer nozzle and RCSs exclusive Redline™ aerospace grade composite propellant formulation, which produces a visible scarlet flame. Redline™ motors burning rate lies …

Aerotech G77-7R/L Redline Rocket Motor (LMS)

The AeroTech Loadable Motor System LMS is a single-use motor in kit form that is assembled by the user. All of the Aerotech LMS motors use all-disposable components. You will need 5-minute epoxy glue to assemble this motor, which is not included. This LMS motor utilizes a patent pending high-strength polymer case and bulkhead, polymer nozzle and RCSs exclusive Redline™ aerospace grade composite propellant formulation, which produces a visible scarlet flame. Redline™ motors burning rate lies …

Aerotech G78-10G/L Mojave Green Rocket Motor (LMS)

The AeroTech Loadable Motor System LMS is a single-use motor in kit form that is assembled by the user. All of the Aerotech LMS motors use all-disposable components. You will need 5-minute epoxy glue to assemble this motor, which is not included. This LMS motor utilizes a patent pending high-strength polymer case and bulkhead, polymer nozzle and RCSs exclusive Mojave Green™ aerospace grade composite propellant formulation, which produces a brilliant green exhaust plume with a moderate amoun…