BT5,BT20,BT50 Engine Mount Parts

Build your own engine mounts.

24mm Motor Retainer Set (2pk)

The perfect accessory for all 24mm engines Allows you to quickly load and unload engines Lightweight, durable and easy to use

SR-71 Blackbird/Tomahawk Cruise

Excellent for backyard launches, this dual rocket pack includes two highly detailed, ready-to-fly Micro Maxx™ rockets, the SR-71 Blackbird and the Tomahawk Cruise Missile. This dual pack includes the two rockets with silver Mylar™ streamers for recovery, plus two collector style display stands.

UFO Flying Saucer/Space Fighter

Excellent for backyard launches, this dual rocket pack includes two highly detailed, ready-to-fly Micro Maxx™ rockets, the UFO Flying Saucer and the Space Fighter. This dual pack includes the two rockets, one with a tumble recovery system and one with a silver Mylar™ streamer recovery system, plus two collector style display stands.

Space Shuttle/Saturn V Rocket

Excellent for backyard launches, this dual rocket pack includes two highly detailed, ready-to-fly Micro Maxx™ rockets, the Space Shuttle and the Saturn V. The dual pack includes the two rockets with silver Mylar™ streamers for recovery, plus two collector style display stands.

Raw Fusion Rocket/Vector 1 Rocket

Excellent for backyard launches, this dual rocket pack includes two highly detailed, ready-to-fly Micro Maxx™ rockets, the Raw Fusion and the Vector 1. The dual pack includes the two rockets with silver Mylar™ streamers for recovery, plus two collector style display stands.

Replacement Fin Set

These rigid foam fins are die-cut from a unique rigid foam material that is super lightweight and has a thin skin on both surfaces for strength. Much more rigid and sturdy than foam meat tray type fins. Each fin is precisely cut to fit into a center ring. After the three fins have been slid into place and the alignment carefully checked, you apply a fillet of low temp hot melt glue to each fin/ring joint. This allows you to get perfect alignment each time. And for the SAFEST fin attachment syste…

External Battery Connector (EBC)

The Quest External Battery Connector (EBC) is an excellent resource for larger group and classroom launches. The EBC allows you to easily use a more powerful 6-volt alkaline lantern style battery with your Quest launch controller. Simply attach the EBC onto the 9-volt connector of your Q2 launch controller and connect the other end to a standard 6-volt alkaline lantern battery and you're ready for a full day of launching model rockets! Requires a 6-volt alkaline lantern battery (not included). …

Mosquito

INSTRUCTIONS Introducing the Mosquito Model Rocket - a mini rocket based on the 1335 Mega Mosquito design that will take your rocketry game to new heights! With a height of only 3.8 inches, this tiny rocket boasts an impressive performance that will surprise you. The Mosquito Model Rocket is a great project for all rocket enthusiasts. Its tumble recovery feature ensures the safe return of the rocket to earth. With the A10-3T mini engine, which is the most powerful mini engine made by Estes…

Estes Blast Deflector Plate

New blast deflector plate replaces that old worn out one!

Regular Engine Mount Kit (3pk)

Regular engine mounts. Easy to assemble with complete instructions.

BT5-BT55 CenteringRings (26pc)

Centering Rings! 26 pieces. 5 popular sizes.

18mm Engine Retainer Set (3pk)

18mmEngineRetainerSet(3pk)

Large Tube Coupler Pack

Tube coupler pack for the large tubes BT-55, BT-56, BT-60 and BT-80.

Luna Bug

INSTRUCTIONS Luna Bug is a powerful and exciting addition to your rocket collection! With the ability to soar up to 800 feet on Estes Mini Engines, this tiny rocket packs a punch that will challenge both entry-level and intermediate-level rocket enthusiasts. Whether you're looking to step up from ready-to-fly models or start with a challenge, the Luna Bug Model Rocket is the perfect choice. Its compact size and impressive capabilities make it an ideal option for anyone looking to take thei…

Adhesive Back Sand Paper

Adhesive Back Sand Paper

1/4A3,1/2A3, A3 and A10 Starter Plug

Now available for purchase seperately. Used with all standard engines.

1/2A6, A8, B4, B6 and C6 Starter Plug

Now available for purchase seperately. Used with all standard engines.

C11, D12, E9, E12, E16 and F15 Engine Plugs

Now available for purchase seperately. Used with C11, D and E 24 mm engines.

24" Parachute

Light-weight ,  yet durable parachute Two color design Comes preassembled

Shock Cords & Mount Pack

Contains two sizes of shock cords with mounts and instructions. Contains two 1/8 in. x 18 in and one 1/4 in x 36 in. rubber shock cords and four shock cord mounts.

Startech Starters (6pk)

The new StarTech starters stay true to the design of the original, with one key addition. The small nichrome wire, the one that heats the propellant at launch, has been dipped in a specially crafted chemical compound that reacts with the heat of the wire to create a large burst of heat and pressure that ensures ignition. Never misfire again! Includes 6 starters.

Mini to Standard Engine Adapter

Two simple steps transform a mini engine into a standard size. Insert a mini engine into the adapter, and insert the adapter into a rocket. 3 adapters per pack. Reusable. Adapts standard engine mounts to hold a mini engine. NOTE:  Rockets weighing up to 2 ounces that would normally fly on A8-3 engines can be flown on A10-3T engines.

Standard to D Engine Adapter

Two simple steps transform a standard engine into a D size. Insert a standard engine into the adapter, and insert the adapter into a rocket. 3 adapters per pack. Reusable. Adapts D engine mounts to hold a standard engine. NOTE:  This motor adapter has been tested in products that use ESTES metal engine hooks. It may not work with other brands of engine hooks. Rockets weighing up to 4 ounces that would normally fly on C11 or D12 engines can be flown on B and C engines.

Launch Lug Pack

Contains four sizes of launch lugs (16 lugs total) in one convenient pack Can be used with 1/8 inch, 3/16 inch, and 1/4 inch diameter launch rods

Clay Nose Cone Weight (10pk)

Adds weight to your Nose Cone!

24mm to 29mm Motor Adapter Set (2 pk)

Very simple transformation of an Estes 24 mm casing into an Estes 29 mm casing size. Reusable. Adapts Estes 24 mm C11/D, Estes 24 mm E and Estes E30 series Composite engines to a 29 mm Estes casing size. Also adapts other brands of 24 mm composite single use and RMS motor systems. 2 sets per package. Includes orange paper adapter tubes, as shown, and are designed for reuse over and over.

15" Parachute-Estes

Printed two color design. Preassembled 15 in. (38 cm) Parachute.

18" Parachute-Estes

Light-weight ,  yet durable parachute Two color design Comes preassembled

Recovery Wadding (72 Squares)

Flame resistant recovery wadding protects the recovery system and is necessary to launch model rockets.

Engine Hook Accessory Pack

7 engine hooks. 3 different sizes.

NC-5 Nose Cone (5pk)

NC-5 Nose Cone (5pk) NC-5 Nose Cone will fit BT-5 body tubes.

NC-20 Nose Cone (4pk)

NC-20 Nose Cone will fit BT-20 body tubes.

BT55,BT60 Body Tube Couplers (6pc)

Tube Couplers! 6 pieces. 2 popular sizes. 2 each : BT55 – 1.25 inches long 2 each : BT60 – 1.5 inches long 2 each : BT60 – 3 inches long

12" Parachute

Red color. Preassembled 12 in. (30.5 cm) Parachute.

9" Parachute

Printed two color design. Preassembled 9 in. (22.9 cm) Parachute.

NC-80b Nose Cone

Lightweight yet durable Fits the BT-80 body tube Contains one nose cone with eyelet for shock cord and shroud line attachments

BT5,BT20,BT50 Body Tube Couplers

Tube Couplers! 6 pieces. 3 popular sizes. 2 each : BT5 – 1 inch long 2 each : BT20 – 0.75 inches long 2 each : BT50 – 1 inch long

BT80 Body Tube Couplers (2pk)

Perfect for connecting your BT80 body tubes together Includes Two Tube Couplers

Replacement Bumper

This foam donut acts as a bumper to protect the front of your PET bottle against landings on hard surfaces. Part of the FUN in flying your Quest water rocket is experimenting with different amounts water and air pressure. Sometimes, if you add too much water, it shifts the center of gravity too far back and your rocket will fly unstable. The hole in the bumper can be used to easily add nose weight to your rocket such as clay. How about a game of Splat Landing??? Just add a regular size paintball…

6" Parachute

Printed two color design. Preassembled 6 in. (15.2 cm) Parachute.

3 Gram Charge Well

Rocket Junkies Aluminum Charge Wells are designed to be used with the avionics bays of Mid to High Power Rockets. The aluminum deployment charge wells are mounted to the AV Bay bulkhead with the provided stainless steel screws, washers and nuts. Machined from solid aircraft grade aluminum and black anodized, Rocket Junkies Aluminum Charge Wells are made to last for many flights. We recommend up to 3 grams of black powder. Please use caution when working with black powder. Safety glasses are reco…